Using A Border Punch Strip As Edging on a Circle

For those that asked how I used a MS Punch to put a border on a circle here is a little tutorial on it.Its my first try at a tutorial so please bare with me.




Step 1: Punch strip of paper as usual.



Step 2: Trim down to 1/4 inch from the design.



Step 3: Using scissors snip into the design leaving the outer edge intact.



Step 4: Use tacky tape, glue, etc. to fasten strip to back of circle or other shape making sure to keep the same amount of the design peaking over the edge.



Voila! your done!



You can experiment with different punches and shapes, this punch also makes a great edging for hearts.

Thanks for stopping by, Have a great weekend!
Hugs